The Ghost Immobiliser
Immobilisers can be an effective weapon in the fight against car theft. They prevent the vehicle from starting if the doesn't have an ignition key fob. They also work well to stop hotwiring or other traditional methods of vehicle theft. However, newer techniques like key cloning and relay theft are becoming more common.
Created to counter these current trends, the ghost immobiliser works to make your car completely inaccessible. It is silent and stealthy and does not rely on radio signals, key fobs or LED indicators.
Easy to install
The Ghost Immobiliser is an innovative device that connects to the CAN data network inside your vehicle to prevent key theft and cloning. It is an TASSA approved product and has been approved by insurance companies. It operates quietly and is virtually unnoticeable to thieves. It makes use of buttons on your steering wheel, center console and door panels to create a unique pin code that must be entered prior to being able to start your car. You can create up to 20 different sequences for increased security. It's easy to install and doesn't require any additional hardware.
To ensure the best possible results, it is recommended that you select a reputable CAN immobiliser installer who specializes in your specific vehicle. Idealy, they should have a workshop near you that you can visit to get your installation done. They will also have a variety of tools and materials to assist you during the installation process. They will provide basic hand tools, multimeters insulation tape and heat shrink tubing for protecting the connections. A user manual will provide instructions specific to the wiring of your vehicle.
Before beginning the installation, disconnect the battery to avoid short circuits and airbag deployment. It is crucial to confirm the location of the CAN H and L wires, as the wrong identification could result in unintentional system integration. It is also a great idea to label or mark the wires. Make use of a multimeter to ensure that the power source is supplying a constant 12V.
Advanced thieves employ a variety of strategies to get around Ghost Immobilisers, including jamming or spoofing. These techniques work by amplifying signals sent from the key fob to the electronic controller unit. However, with the latest anti-jamming technology and a vigilant surveillance you can safeguard your vehicle from these sophisticated attacks.
Increased security
Ghost immobilisers are an extra layer to protect your car against theft. It works with an PIN code protection system that is operated by using buttons that are already on your steering wheel or dashboard making it difficult for thieves to access the device and steal your vehicle. The device is designed to be hidden in your vehicle. It does not have lights or other indicators to alert a potential burglar to its presence. It communicates directly with the ECU of your car via the data bus. This means it isn't vulnerable to hacking or relay attacks.
It's a fantastic investment for those with prestige automobiles which are at greater risk of theft because of their worth and popularity. Its enhanced features protect your car from key duplicates and ECU swapping. Some ghost immobilisers can also be linked to an app, allowing you can easily arm and dearm them. They may also have a service/valet setting that allows you to temporarily deactivate the immobiliser during repairs or service.
Another benefit of a ghost immobiliser is that it doesn't require any cutting of wire. This is a fantastic feature, especially if your vehicle is newer and does not come with an immobiliser. Certain systems are equipped to work with an GPS tracking device, which can provide an additional level of security for your vehicle. The use of a GPS tracker can aid in reducing your insurance premiums. If you opt to purchase a ghost immobiliser be sure it is TASSA certified and a professional installer will install it for you.
Compatible with all major models and brands
The Ghost Immobiliser is made to work with all major vehicle models and makes, protecting your prized possessions from theft. It generates a unique pin code using buttons on your steering wheel, console or door panels. You must enter this code before you can drive. The system is secure and undetectable. It is also is covered by a three-year warranty. It is also fully endorsed by insurance providers This means that it can help to lower your premiums.
Unlike the standard immobilisers, which utilize your key fob to control the ignition of your car and ignition, the Ghost system is connected directly to the engine controller unit using the CAN data bus. This means it's tamper proof, virtually impossible to remove or disable and cannot be targeted by organized car theft criminal gangs. Additionally it is possible to use the Ghost system can be linked with a secure iPhone application that permits remote management and monitoring.
You can choose an PIN code that is simple to remember, yet mathematically impossible for thieves to determine. You can customize and change the PIN at any time to protect your vehicle, even if it is parked in a parking lot or on the street. You can also choose a valet or service mode in case you require someone other than you to drive your vehicle for a short period, for example when it's in the garage for maintenance. This feature can also prevent your car from being taken by a dishonest mechanic. To ensure your security you can choose a Ghost call alert that will inform you when your car is in motion or if it's been moved.
Convenience
The ghost immobiliser guards your vehicle from theft techniques like key cloning or relay attacks. It is activated by connecting to the car's CAN network and preventing communication with the engine ECU. This makes it hard for criminals to hack or copy your vehicle.
Once installed, you'll have to enter a PIN up to 20 digits long using the buttons on the dashboard as well as the steering wheel to start the car. The system is completely concealed and inaccessible to thieves because it does not emit any radio frequency signals. It can also be programmed to change the PIN of the user, which further adds to its security. The system is designed to stop cutting the circuit, making it nearly impossible to alter.
If you do happen to forget your PIN, there are systems that allow you to communicate with the immobiliser using an app on your phone to disarm it immediately. Some come with the option of a service/valet mode, which allows you to start your vehicle temporarily, like when you need to drop it off for maintenance or valet parking.
The Ghost Immobiliser is also inaccessible to thieves, since it doesn't transmit radio signals. This is an important advantage over other security products that are available from the aftermarket. Additionally, it is simple to use and doesn't require any complex wiring. It can be used combination with dash cams to provide added safety. This dash cam is Thinkware F70, which features clear and crisp HD dashcam footage in 1080p HD as well as Format Free Technology and parking mode. The system can also be hardwired to ensure maximum performance and durability.
Installation
If you're looking to safeguard your vehicle from theft it is important to select the right immobiliser ghost. This device will help to in preventing theft of your car by blocking the communication between your engine controller unit (ECU) and key fobs. This device blocks thieves from stealing the signal that allows you to start your vehicle. It also can detect any signs of manipulation and notify the owner of the vehicle.
The device is simple to install and integrates with the existing systems in your vehicle. It doesn't require any modification to the wiring in your vehicle and can be positioned in a concealed location like under the dashboard. Follow the instructions in the manual to make sure that the device is installed correctly. After installation, it's important to test the system. This will ensure that the immobiliser ghost is working in the way it is intended.
You can purchase an Autowatch Ghost 2 immobiliser and have it installed by a reputable installer. The installer will connect Ghost to your vehicle's CAN Bus system, making it more difficult for thieves to remove the system or bypass it. The installation process generally takes 2-3 hours.
During the process of installation it is recommended to consult the wiring diagram for the vehicle model you are using. This will allow you to locate the CAN High and CAN Low wires needed to connect the Ghost to the engine of your vehicle. It is also crucial to verify the connections to ensure that they are secure and insulated.
Once the installation is completed, you are able to start using the Ghost Immobiliser in a normal manner. visit this page will shut off the ignition of your vehicle if it is not able to start it using the correct PIN, which you can enter yourself. The ghost immobiliser cost can also be put into Service/Valet mode in the event that you need to hand over your vehicle for maintenance or valet parking.